Bobcat ZT2000 42

The Bobcat ZT2000 42 is a narrow-cut option for someone shopping used equipment or a dealer's remaining stock. Bobcat now places the ZT2000 under non-current models. That makes identification and condition central to the buying decision, rather than assuming a live web page means current production or availability.

Match the mower to its service record

Bobcat's service schedule index identifies the 42-inch ZT2000 as model 9992001. Photograph the plate and match the manual and service records before ordering parts. The model-number guide provides a practical way to organize that information.

The manufacturer's specification page lists a 21.5 hp Kawasaki FR651V, ZT-2800 transaxles and a 7 mph travel maximum for the 42-inch version. Do not import the engine rating from the larger ZT2000 52.

Inspect the equipment, not just the badge

TufDeck construction combines a 10-gauge top with 7-gauge spindle supports and side skirts. That is more precise than calling every part of the deck 7-gauge steel.

A high-back spring suspension seat and sliding fore-aft adjustment are documented. On a used unit, check the mechanism and adjustment rather than treating the original specification as evidence of its current condition. Ask for a demonstration and a qualified inspection of the deck and drive.

The public table repeats some values across different deck columns and gives different height ranges for named variants. This review avoids turning those inconsistent entries into exact clearance or setup instructions. Confirm them in the manual for the actual serial number.

Establish the coverage that remains

Bobcat's North American policy lists 36 months/500 hours for ZT2000, with the engine handled separately. The relevant purchase date and original terms still control an individual machine's coverage. Obtain confirmation from the dealer.

This mower is worth comparing when a smaller cutting deck and ZT-2800 drive fit the job. Condition, parts support and the asking price will matter more than an unverified claim of commercial performance.

Our ZT Score

7.3/10 — our research-based editorial assessment using the ZeroTurn scoring method.

• Cut quality (30%): 7.4/10. Reinforced TufDeck supports the equipment assessment; finish and exact setup need inspection.
• Build & durability (25%): 7.6/10. ZT-2800 and specified deck reinforcement are useful hardware, with used condition unresolved.
• Comfort (20%): 7.2/10. Spring suspension seat and slide adjustment offer operator fit; present condition is unknown.
• Value (15%): 6.9/10. A used compact machine may fit well, but history, price and support determine value.
• Ease of use (10%): 7.3/10. Smaller cutting span can suit a home route; serial identification and equipped width need confirmation.

Provisional research-based editorial assessment, not a hands-on test. Cutting results, ride quality and service life have not been measured. Model-specific owner consensus and comparable delivered US/Canadian prices were not established. Value depends on the actual configuration, property and local service support.